Description

Rubber seal for window frames, with peel-off protective film, for timber joinery.
Application: First perimeter waterproofing barrier on the window frame.
This seal is extruded from rubber with glass fibre (models LC1 to LC5 only) embedded in the base to prevent elongation during installation.
The active parts are covered with a peel-off protective film, allowing the seal to be painted after installation.
Available in black only.
Sold by the linear metre (minimum 5 ml) or in 75 ml coils (models LC1 to LC6) and 50 ml or 300 ml coils for model LC7.

Model LC1:
Clearance: 4mm / Height: 10mm / Top-to-base gap: 1.5mm / Depth: 7mm (see sketch)

Model LC2:
Clearance: 4mm / Height: 10.2mm / Top-to-base gap: 4mm / Depth: 7mm (see sketch)

LC4 model:
Clearance: 4mm / Height: 9.6mm / Top-to-base gap: 2.6mm / Depth: 6mm (see sketch)

Model LC5:
Clearance: 3mm / Height: 9.5mm / Top-to-base distance: 1mm / Depth: 6mm (see sketch)

Model LC6:
Clearance: 4mm / Height: 10.5mm / Top-to-base clearance: 0.8 mm / Depth: 6 mm (see sketch)

Model LC7:
Clearance: 4 mm / Height: 11 mm / Top-to-base clearance: 0.8 mm / Depth: 6 mm (see sketch)